When I first purchased my new stainless steel weiman water cooler I was excited about the cooler, but I was worried about how it would hold up.
It’s a well-designed and sturdy water cooler that’s made of stainless steel.
It is, however, a bit fragile and I’ve been having trouble getting it to move smoothly.
Thankfully, I have a handy tool for removing the stainless steel from the back of the water cooler.
I have seen stainless steel water coolers on sale for well over a year, so I decided to give it a shot.
The stainless steel cooler works well, but it needs to be installed to keep it from leaking.
To do this, you need to take off the plastic cover and remove the bottom of the cooler.
I decided that I needed to remove the stainless bottom and use my knife to cut off the remaining plastic and the backside of the stainless backplate.
I then used a flat-head screwdriver to remove all the plastic and replace it with stainless steel that was sitting in the cooler’s plastic.
It worked like a charm.
You can see in the photo above that I had to use a sharp edge to get the bottom out of the plastic cooler and I didn’t even have to use my scissors.
It looks like I had a good job removing the plastic backplate and it was easy.
I then used my drill to drill two holes through the backplate to attach the back plate to the water cooler.
I used a piece of tape to secure the tape to the back.
You should now have a stainless steel bottom that can easily be removed.
You’ll notice that I’m not using a screwdriver because it will cut the plastic into tiny pieces that can be easily broken off and reused.
It took me a couple tries, but eventually I got it right.
You’ll also notice that there are two screws on the back and they’re located on the inside of the back, where the plastic is sitting.
That means that you can use your fingers to push the plastic down onto the back where it will eventually fit into the watercooler.